EnviroTex Lite

EnviroTex Lite® is a water clear 1:1 mix ration by volume epoxy resin used to coat surfaces. It cures to a long-lasting, high gloss coating in approximately 8 hours at 70°F, and reaches full strength and toughness in about 72 hours. This durable, resilient material requires no polishing to produce a high gloss. One coat is all that is usually required for an attractive finish, however, two or more coats maybe applied one over the other to build additional thickness. Read all instructions prior to use. The original 1:1 epoxy coating system since 1969 Convenient 1:1 mix ratio by volume 20-30 minute working time / 8-12 hour tack-free time Full cure in 72 hours FDA Complaint (FDA 21 CFR 175.300) when accurately measured, thoroughly mixed, and fully cured.  Self-levels to approximately 1/16" Produces a durable high-gloss surface coating for artwork, table

TUTORIAL How to Use Envirotex Lite or ICE Resin on Polymer

EnviroTex Lite Pour-On High Gloss Finish Kit- (2) 16 oz Bottles- Only Used Once! 33331020324

ETI 8OZ HIGH GLOSS ENVIROTEX LITE POLYMER COATING TWO PART KIT - World Paint Supply

TUTORIAL How to Use Envirotex Lite or ICE Resin on Polymer

Envirotex Lite Pour-On 32 Oz. High Gloss Finish - Dazey's Supply

Open Box Envirotex Lite 02008 Pour-On High Gloss Finish 8 fl oz Craft

Envirotex Lite Polymer Coating : TAP Plastics

Envirotex Lite® Pour-On, High-Gloss Finish - 1 Gallon – Log Home Mart

EnviroTex Lite

Envirotex Lite Kit 4oz (118ml) - Wynn Fraser

Experience with Envirotex Lite : r/ResinCasting

January Resin Crafting Challenge with Envirotex Lite - Resin Crafts Blog

Envirotex Lite®, Gallon kit, Pour On High Gloss Finish, (1/2 gallon resin, 1/2 gallon Hardener.) Item # 02128 $74.49 , Gallon Kit: Coverage: 32 square

Envirotex Lite Gallon Kit 02128

Envirotex Lite Kit 8oz (236.5ml) - Wynn Fraser